MAGICOLOR QMS 2200 DRIVER

Upper cover Upper paper exit sensor. Turn the cam gear by hand and check if the sen- sor light breaker plate stops the light. Multipurpose tray position sensor PC 15 Detects the upper and lower position amount of the multi-pur- pose tray. Lift up on the control panel, disconnect one connection, and remove it. If the problem persists, check the paper full sensor. Oil coating roller Cleans the fusing belt and applies oil. Remove the 1 set screw for the bearing on the rear side.

Uploader: Meran
Date Added: 24 April 2011
File Size: 42.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 65141
Price: Free* [*Free Regsitration Required]

Always unplug connectors by holding the connector housing. Yes Clean the OHP sensor port.

Minolta-QMS Magicolor 2200 DeskLaser

They are image transfer belt errors, belt cleaner pressure error, and AIDC error. The frictional force of the separator pad prevents the second sheet of paper from being sent simultaneously.

Multipurpose tray-lifting arm position detection is performed mahicolor paper take-up is being performed from the multipur- pose tray. Does the image transfer roller pressure solenoid one-way clutch have a hook? Track your order Order number: D Multipurpose paper take-up tray 1.

Remove the rear cover – 2 screws. The amount of toner consumed is calculated using the printing data for the number of pixels printed and added to the count.

  CANON MX432 DRIVER DOWNLOAD

Does the power supply fan motor Magicloor operate during power on initialization? Off Paper empty Paper empty sensor: Precise adjustment has been made to the internal variable resistor VR1 to match the speed of the fusing motor with the finished diameter of the roller. The maximum power of the laser diode is 5mW and the wavelength is nm.

Full text of “Konica Minolta QMS magicolor Service Manual”

A jam error is reset when the power switch is cycled off and on, or when any one of the following doors or covers are closed: Remove the right-rear cover 2. Is the fuse burned out in PU1 power supply circuit board? C Developing The toner is applied in an even thickness to the developing roller by the toner controller plate, the toner is then applied to the electrostatic latent image on the OPC drum, and finally the toner image is developed.

Top rated Most recent Top rated. Alexa Actionable Analytics for the Web. Paper size switch Detects the size of the paper in the cassette.

Make repairs as necessary. Invisible laser light that can cause blindness will be emitted. Remove the hook for the paper size switch and pull out the 1 con- nector.

This printer uses an invisible laser beam. Defective image transfer transport. That warranty will vary depending on which brand you are purchasing, and we recommend that you visit the OEM website for exact specifications. Product information Technical Details.

  BRIO BA410 DRIVER

COMPATIBLE FOR QMS MAGICOLOR OPC DRUM /

Magicoloe believe that Minolta knows how expensive a system it is for the small business owner and household user to operate, but because the Magicolor is such a cash cow in the consumable department Minolta will not correct any of the systems shortcomings. The image transfer belt turns one time with the image in the formed state on the image transfer belt.

Omitting them may result in contact failure which could cause an electric shock or fire. Remove the ozone fan motor 1. Replace the fusing unit Other spacing. Image transfer belt cleaner Cleaner lever Image magkcolor belt Light shield blade Belt cleaner separation position sensor PC 16 C Waste toner collection mechanism The waste toner on the OPC drum and image transfer belt is collected in the waste toner container.

These regulations apply to laser products manufactured from August 1, Is the voltage at the electrical outlet the correct voltage?